| Customization: | Available |
|---|---|
| After-sales Service: | One Year |
| Warranty: | One Year |
|
Still deciding? Get samples of US$ 3790/Set
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
KN620-3 Edge Banding and Trimming All-in-one Machine:
Achieve "right edge banding and left trimming" molding in one machine, creating two functions in one machine.
Reasonable partitioning:
The edge banding area is highly professional and dedicated to edge banding of a variety of decorative materials, and can be applied to various boards.
The trimming area will not damage the surface of the product and can improve the appearance quality of the product. With a cleaning device, the board will be cleaner.
Designed with a triangular front shield, it is convenient for standing and you will not feel tired after standing for a long time.
Others:
1.Rotatable LCD screen for easier operation.
2.Heightening the machine head can seal higher edge strips, upgrading from 8-50mm to 14-70m.
3.Machine head rotation, 15°/0/-15°, three angles, increases plate compatibility, operates more plates, and is more flexible.
4.Glue pot, 2600ml, dual-purpose PUR and EVA, internal coating, one-click glue discharge, easy glue replacement.
5.Layered board design, precision design, fixed edge banding is not easy to deviate, and is done right from the first step.
6.Secondary auxiliary pressure roller, the edge banding strip and the plate are pressed twice to increase the adhesion.
7.Anti-reverse walking plate: A new U-shaped limit groove is added to prevent the edge banding from rebounding, floating up and down, and smooth tape feeding.
8.The meter counter is docked with a meter-counting tape, and the docking error is ±1mm.
9.Gluing assembly and hot air gun. The gluing assembly is used to apply glue to the edge strips and boards.It is double-sided glued for a better fit.
10.The hot air gun has the function of softening the edge banding strip and making the edge banding strip more firmly adhered.
11.Start-stop switch, the machine will automatically stop 5 seconds after the plate leaves the sensor, protecting workers' safety and saving energy.
12.No need to adjust the thickness of the board, quickly adapt to the thickness of the board, no manual operation required (14-70mm).
13.Scrape as you go. After trimming is completed, scrape off the excess edge strips and glue lines.
14.The circular stacked arm design has a stronger physical load-bearing capacity than the square stacked arm. The stacked arms are lightweight and more flexible in operation.
|
Model
|
KN-620-3
|
|
Voltage
|
380V/50HZ/3phase
|
|
Total power
|
5.7KW
|
|
Edge banding speed
|
0-20cm/s
|
|
Air pressure
|
0.6-0.8Mpa
|
|
Vacuuming hole
|
φ150mm
|
|
Glue pot temperature
|
110ºC-210ºC
|
|
Glue material
|
PUR/EVA
|
|
Glue pot volume
|
2600ml
|
|
Strip thickness
|
0.5-3mm
|
|
Trimming
|
14-70mm both sides trimming, <14mm single trimming
|
|
Strip width
|
14-70mm
|
|
Minimum working radius
|
R=20mm
|
|
Size
|
2010*1460*1470mm |
Q1: I already have an edge banding machine and I would like a trimming machine. Do you have any recommendations?
){kind=link}