| Customization: | Available |
|---|---|
| Model: | F12X-3 |
| Voltage: | 220V/50Hz/1 Phase |
|
Still deciding? Get samples of US$ 1590/Set
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
F12X-3 curve edge trimming machine:
1. The standard small workpiece platform facilitates trimming of small plates (both large and small plates can be done in one machine).
2. The upper and lower sides are trimmed together, and the trimming knife rotates at the same time, and the excess edge banding strips on the upper and lower sides are trimmed off at one time.
3. Automatic glue clearing, automatic spraying of glue clearing agent, double-sided spraying to prevent blades and plates from being stuck with glue, which affects the trimming effect, lubricates the plates, and prevents scratches (the glue spraying time is controllable).
4. Scrape along with the movement. After the trimming is completed, the excess edge strips and glue lines are scraped off flatly. The double-sided trapezoid design can be trimmed and the utilization rate is high (trimming, clearing glue, and scraping the edges are formed in one go).
5. Photoelectric induction (start-stop switch), automatically senses the plate for 5 seconds, and automatically stops if the plate cannot be sensed, protecting worker safety and saving energy.
6.Efficient vacuuming, dense brush and 150mm thick vacuum tube, sucking debris into the vacuum tube.
7.No need to adjust the plate thickness, quickly adapt to different plate thicknesses (14-70cm) less than 14mm, customized profiling plywood.
8.The profiling power wheel drives the plate forward according to the speed of the profiling wheel during trimming, making the trimming smoother.
9.PTFE air column, fixed plate, automatic blowing, prevent scratching the plate, wear-resistant, self-lubricating.
10.The handwheel for adjusting the trimming amount of the edge banding strip is suitable for adjusting the thickness of the edge banding strip, 0.4-3mm, which can be flexibly adjusted according to the thickness of the edge banding strip.
|
Model
|
F12X-3
|
|
Voltage
|
220V/50hz/1 phase
|
|
Total power
|
1.7kw
|
|
Air pressure
|
0.6-0.8Mpa
|
|
Thickness of edge banding
|
0.4-3mm
|
|
Trimming sheet height
|
<14mm(one-sided trimming)14-70mm(trimming up and down)
|
|
Trimming motor
|
220v/800w/2400r/min
|
|
Trimming speed
|
0-14.34m/min
|
|
External dimensions
|
1730*890*980mm
|
|
Weight
|
208kg
|
Q1: I already have an edge banding machine and I would like a trimming machine. Do you have any recommendations?
A: Yes, we have a matching trimming machine. You can choose the product that suits you according to your actual production needs. Of course, we will also ask you some questions, such as plate size, plate thickness, equipment voltage, number of workers, and so on. With so many types of products, there is always one that is suitable for you.
Q2: Can your edge banding machine use PUR adhesive?
A: PUR glue has high requirements for glue pots. We recommend using models such as F14620-3700-3350 for up glue pots, depending on your specific needs.
Q3: Are you a factory or a trader?
A: We are a 20 year source production factory with rich production experience and a total of 8000+customers. We can provide you with thoughtful and accurate after-sales service.
Q4: How should I make the payment?
A: Firstly, you will pay a 50% deposit as a prepayment, and then we will start producing the equipment. After the equipment is completed, I will send you photos and videos, and you can make the remaining payment. After receiving all the payment, we will arrange for the fastest container to ship to you. You will receive the equipment soon, and I will arrange professional technicians to coordinate with you regarding installation issues.
Q5: How long is the delivery time?
A: Conventional equipment takes 10-12 days, customized voltage or other parameters take around 30-45 days.
){kind=link}