| After-sales Service: | One Year |
|---|---|
| Warranty: | One Year |
| Type: | Special Shape Edge Banding Machine |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier F12-3 Curve Edge Banding Machine:
1.Increase the height of the glue coating assembly, which uses high-temperature resistant bearings and sealing rings.
2.It can pass 7cm edge banding strip and apply glue on one side of the edge banding strip, which saves glue and has a small glue line.
3.Lower glue pot, enlarge the glue pot to 2800ml to avoid adding glue multiple times.
4.Extended button for convenient and intuitive glue volume adjustment.
5.Upgraded cutter unit, ultra-fast response, ensuring vertical cutting accuracy, double-column balanced cutter stability.
6.The structure is tight and the cutting effect is good. The cutting tape width can reach 70mm and the cutting tape thickness is 3mm.
7.The U-shaped groove-limited new anti-reverse belt conveying plate prevents the edge strip from regressing, making the belt run smoothly and smoothly without deviation. It can quickly adjust the height of the edge strip to prevent the edge strip from rebounding and moving up and down, and the belt feeds smoothly.
8.Two glue clearing devices automatically spray glue clearing agent to avoid glue sticking on the laminating wheel and the pressure belt plate.
The fitting wheel can be adjusted left and right according to the width of the edge banding strip to prevent the edge banding strip from deflecting up and down.
9.Secondary auxiliary pressure roller, the edge band and the plate are pressed twice to increase the bonding firmness.
Hot air assists to heat the edge banding strip, soften the edge banding strip, and make the edge banding strip and the board firmly adhere to each other.
10.Stacked arm design, imitating human body folding arm design, curved edge sealing is flexible and efficient, strong suction cup, firmly adsorbs the board (more flexible and efficient than countertop sealing board)
11.The control panel adopts Delixi electrical components, digital temperature controller, timer disconnection, and electronic speed regulator.
12.Bearing-type pressure plate and large knob make it easy to adjust the gap between the edge banding strip and the glue application roller to ensure uniform glue application.
13.Dual cylinders automatically feed and cut off the tape. During edge banding, the tape is cut off under the control of a curve timer or foot pedal.
14.Position the small white shaft, keep the suction cup parallel to the small white shaft, remove the small white shaft, and the suction cup can be directly fixed to the sealing plate (the rubber ring needs to be removed)
15.Stepless speed adjustment, used between the maximum value of the button, set as desired.
16.Intelligent temperature control, you can set the glue to be heated to a predetermined temperature.
|
Model
|
F12-3
|
|
Voltage
|
220v/50hz/single phase
|
|
Total power
|
3.8kw
|
|
Heating power
|
1.6kw
|
|
Air pressure
|
0.5-0.8Mpa
|
|
Glue pot capacity
|
2800ml
|
|
Speed
|
0-24cm/s
|
|
Strip width
|
14-70mm
|
|
Strip thickness
|
0.4-3mm
|
|
Packing size
|
1305*1125*1245mm
|
|
Weight
|
235kg
|
Q1: I already have an edge banding machine and I would like a trimming machine. Do you have any recommendations?
A: Yes, we have a matching trimming machine. You can choose the product that suits you according to your actual production needs. Of course, we will also ask you some questions, such as plate size, plate thickness, equipment voltage, number of workers, and so on. With so many types of products, there is always one that is suitable for you.
Q2: Can your edge banding machine use PUR adhesive?
A: PUR glue has high requirements for glue pots. We recommend using models such as F14620-3700-3350 for up glue pots, depending on your specific needs.
Q3: Are you a factory or a trader?
A: We are a 20 year source production factory with rich production experience and a total of 8000+customers. We can provide you with thoughtful and accurate after-sales service.
Q4: How should I make the payment?
A: Firstly, you will pay a 50% deposit as a prepayment, and then we will start producing the equipment. After the equipment is completed, I will send you photos and videos, and you can make the remaining payment. After receiving all the payment, we will arrange for the fastest container to ship to you. You will receive the equipment soon, and I will arrange professional technicians to coordinate with you regarding installation issues.
Q5: How long is the delivery time?
A: Conventional equipment takes 10-12 days, customized voltage or other parameters take around 30-45 days.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}